"CLI - 시스템 하드웨어 정보 확인"의 두 판 사이의 차이

2020년 12월 17일 (목) 09:38 기준 최신판

시스템의 하드웨어 정보는 CLI에서 show hardware 명령어를 통해 확인할 수 있습니다.

LYSH@MyHostName# show hardware
  *-memory
       description: System Memory
       physical id: 51
       size: 4GiB
  *-cdrom
       description: DVD reader
       product: Virtual CD/ROM
       vendor: Msft
       physical id: 0.0.0
       bus info: scsi@1:0.0.0
       logical name: /dev/cdrom
       logical name: /dev/dvd
       logical name: /dev/sr0
       version: 1.0
       capabilities: removable audio dvd
       configuration: ansiversion=5 status=nodisc
  *-disk
       description: SCSI Disk
       product: Virtual Disk
       vendor: Msft
       physical id: 0.0.0
       bus info: scsi@2:0.0.0
       logical name: /dev/sda
       version: 1.0
       size: 200GiB (214GB)
       capabilities: gpt-1.00 partitioned partitioned:gpt
       configuration: ansiversion=5 guid=00000000-0000-0000-0000-000000000000 lo
gicalsectorsize=512 sectorsize=4096
  *-network
       description: Ethernet interface
       physical id: 1
       logical name: eth0
       serial: 00:00:00:00:00:00
       size: 100Mbit/s
       capabilities: ethernet physical
       configuration: autonegotiation=off broadcast=yes driver=hv_netvsc duplex=
full firmware=N/A ip=127.0.0.1 link=yes multicast=yes speed=100Mbit/s
  *-cpu
       Architecture:        x86_64
       CPU op-mode(s):      32-bit, 64-bit
       Byte Order:          Little Endian
       CPU(s):              8
       On-line CPU(s) list: 0-7
       Thread(s) per core:  1
       Core(s) per socket:  8
       Socket(s):           1
       NUMA node(s):        1
       Vendor ID:           GenuineIntel
       CPU family:          6
       Model:               79
       Model name:          Intel(R) Xeon(R) CPU 
       Stepping:            1
       CPU MHz:             2194.919
       BogoMIPS:            4389.83
       Hypervisor vendor:   
       Virtualization type: full
       L1d cache:           32K
       L1i cache:           32K
       L2 cache:            256K
       L3 cache:            30720K
       NUMA node0 CPU(s):   0-7

@@ 1번째 줄: / 1번째 줄: @@
-시스템의 하드웨어 정보는 CLI에서 <code>show hardware</code>를 통해 확인할 수 있습니다.
+시스템의 하드웨어 정보는 CLI에서 <code>show hardware</code> 명령어를 통해 확인할 수 있습니다.
 <pre>
 LYSH@MyHostName# show hardware