You do not have permission to edit this page, for the following reason: The action you have requested is limited to users in the group: Users. You can view and copy the source of this page. The imRAD has two dashboards. One is for the RADIUS and the other is for the DHCP.<br> Each dashboard switches automatically in 30 seconds and you can stop the switching by clicking again one of the buttons at the top of the dashboard. ==== DHCP Hourly Assignment ==== It displays how many IP addresses are assigned and in lease for 72 hours.<br> The chart shows [[DHCP assignment, lease and availability | the IP Lease]] and [[DHCP assignment, lease and availability | the Assignment]] ratio and the lease ratio is always less or equal to the assignment ratio .<br> ====== Current DHCP Pool Availability Top 5 ====== This list displays the availability of each DHCP pool of the order in which availability is small.<br> The availability 0 means there are no more IP addresses to assign. ==== DHCP Hourly HPM(Hits per minute) / LPM(Leases per minute) ==== The HPM stands for Hits per minute and means how many DHCP requests the DHCP server receives in a minute.<br> The LPM stands for Leas per minute and means how many IP addresses are assigned to the DHCP clients in a minute.<br> The DHCP server does not reply to all DHCP requests from clients because the IP address for some requests may not find in the DHCP pool. So the LPM is always less or equal to the HPM.<br> The HPM that is very greater than the LPM means the DHCP server could not assign IP addresses to many DHCP clients because of lack of IP addresses in a DHCP pool or no DHCP pools for the requests.<br> In this case, You must check the failure of reply for DHCP requests at the [[DHCP Log | Post DHCP Log]]. ==== DHCP IP Address Assignment ==== It displays the assigned, released, declined, and expired IP addresses in real-time. 현재 임대된 현황을 최근 시간 순서로 표시합니다. <br > IP 주소를 클릭하면 주소를 할당 한 호스트의 [[IP_주소_목록|상세 정보]]를 확인 할 수 있습니다. <br> 지속은 주소를 최초로 임대 받은 이후 얼마나 오랜 시간 네트워크 단절 없이 동일 주소를 사용하고 있는지를 나타냅니다. ==== RADIUS 시간별 Accounting ==== 시간별로 RADIUS Accounting을 나타내며 시간별로 얼마나 많은 호스트가 승인되어 네트워크에 연결되어있고 얼마나 많은 트래픽을 발생했는지를 표시합니다. <br> 단, Accountig을 지원하지 않는 NAS 장비가 존재할 경우 그 NAS에 대한 데이터를 표시되지 않습니다. * Default: Proxy를 통해 승인된 호스트 개수를 의미합니다. * LOCAL: 로컬 사이트에서 승인된 호스트 개수를 의미합니다. * 온라인: 현재 온라인 상태의 호스트 개수를 의미합니다. ==== RADIUS 시간별 인증처리 ==== 시간별로 얼마나 많은 클라이언트가 인증 요청을 했는지를 나타냅니다. Return to Dashboard.