EditDiscussionPage history

Difference between revisions of "NAS Identifier"

 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
−
=== RADIUS > 설정 > NAS-ID ===
+
=== RADIUS > Settings > NAS-ID ===
 +
Network access server identifier (NAS-ID) is used to notify the source of a RADIUS access request, which
 +
enables the RADIUS server to choose a policy for that request.<ref>https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/network-access-server-identifier.pdf</ref><ref>https://freeradius.org/rfc/rfc2865.html#NAS-Identifier</ref>
  
−
RADIUS 클라이언트(AP Controller, AP 등)에서 전송한 Access-Request에 포함된 식별자로 [[NAS]]를 구분하기 위한 정보입니다.<ref>https://freeradius.org/rfc/rfc2865.html#NAS-Identifier</ref><br>
+
In the wireless environment, the NAS-ID Attribute may indicate an SSID(Service Set Identifier) but the name may be different because it may be configured manually in an Access Point.
−
무선랜 환경에서는 SSID에 해당하나 SSID와 표시 이름은 다들 수 있습니다.
 
  
−
imRAD는 NAS-ID를 자동으로 수집하며 이 정보를 관리 할 수 있습니다.
+
The imRAD automatically saves NAS-ID attributes from all request.
 +
{| class="wikitable"
 +
! Column !! Description
 +
|-
 +
| style='width:150px' | NAS-Identifier || The name of a NAS-Identifier.
 +
|-
 +
| NAS IP Address|| The IP address of a NAS of which generates the NAS-Identifier.
 +
|-
 +
| Called-Station-ID || Refer to the [[Accounting]].
 +
|-
 +
| NAS Port Type || Refer to the [[Accounting]].
 +
|-
 +
| Simul || It is short for "Simultaneous-Use" and used to control simultaneous access of the same User-Name in a NAS-Identifier. The "no-limit" means there is no limit access for the same User -Name.
 +
|-
 +
| PTA || It indicates that a NAS-ID is specific to a particular [[Authentication DB | External Database]].
 +
|-
 +
| realm || The [[Realm and proxy | realm ]] that sets the NAS-Identifier.
 +
|-
 +
|}
  
−
<br></hr>
+
=== References ===

Latest revision as of 14:19, 9 August 2023

RADIUS > Settings > NAS-ID

Network access server identifier (NAS-ID) is used to notify the source of a RADIUS access request, which enables the RADIUS server to choose a policy for that request.[1][2]

In the wireless environment, the NAS-ID Attribute may indicate an SSID(Service Set Identifier) but the name may be different because it may be configured manually in an Access Point.

The imRAD automatically saves NAS-ID attributes from all request.

Column Description
NAS-Identifier The name of a NAS-Identifier.
NAS IP Address The IP address of a NAS of which generates the NAS-Identifier.
Called-Station-ID Refer to the Accounting.
NAS Port Type Refer to the Accounting.
Simul It is short for "Simultaneous-Use" and used to control simultaneous access of the same User-Name in a NAS-Identifier. The "no-limit" means there is no limit access for the same User -Name.
PTA It indicates that a NAS-ID is specific to a particular External Database.
realm The realm that sets the NAS-Identifier.

References

  1. ↑ https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/network-access-server-identifier.pdf
  2. ↑ https://freeradius.org/rfc/rfc2865.html#NAS-Identifier