EditDiscussionPage history

Difference between revisions of "NAS Identifier"

Line 26: Line 26:
 
|}
 
|}
  
−
<br></hr>
+
=== References ===

Revision as of 14:40, 16 April 2021

RADIUS > Settings > NAS-ID

Network access server identifier (NAS-ID) is used to notify the source of a RADIUS access request, which enables the RADIUS server to choose a policy for that request.[1][2]

In the wireless environment, the NAS-ID Attribute may indicate an SSID(Service Set Identifier) but the name may be different because it may be configured manually in an Access Point.

The imRAD automatically saves NAS-ID attributes from all request.

Column Description
NAS-Identifier The name of a NAS-Identifier.
NAS IP Address The IP address of a NAS of which generates the NAS-Identifier.
Called-Station-ID Refer to the Accounting.
NAS Port Type Refer to the Accounting.
Simul It is short for "Simultaneous-Use" and used to control simultaneous access of the same User-Name in a NAS-Identifier. The "no-limit" means there is no limit access for the same User -Name.
PTA The name of Pass-Through Authentication (PTA) that sets the NAS-Identifier.
realm The realm that sets the NAS-Identifier.

References

  1. ↑ https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/network-access-server-identifier.pdf
  2. ↑ https://freeradius.org/rfc/rfc2865.html#NAS-Identifier