We provide Command Line Interface (CLI), the name is LYSH, that is used for configuring, monitoring, and maintaining the imRAD devices. The CLI allows you to directly execute commands, whether using a console or using remote access methods such as Secure Shell (SSH, port 22). We do not provide the telnet to access the imRAD devices.
If you access the imRAD devices via a console port that is located in front of the device, the baud rate(speed) is 115,200 and the serial port type is an RJ-45 connector.
The default or initial Username and Password is each ladmin and 1111.
If you log in with the default, you must change the default password. If not, you can't access the CLI before changing the password.
The CLI has two command line modes: user mode and configuration mode. By default, user mode is where you begin the session with the imRAD devices. The user mode contains commands that you can use to see logs, the status of services, configurations, system variables and information, and so on. You can run some Linux commands in the user mode.
If press the <tab> key at any time, you can complete the command or see the argument of the command, You can also display "help" by input -h or --help at the end of every command,
LYSH@MyHostName# show -h
LYSH@lyondev-40# show -h
usage: show [-h] {apache2,command,config,datetime,dci,files,failover,hardware,interface,listen,log,loghost,multicast,mysql,ntp,php,service,session,system,uptime} ...
show the system informations
positional arguments:
apache2 show the status of apache2 service
command show all or releated commands
config show config files
datetime show current time and zone
dci show decrypted database connection information
files find files in LYON_HOME and display them
failover show the configuration of system failover
hardware show hardware information
interface show network interfaces and assigned addresses
listen show network listening and program
log show logs
loghost list the address of remote log servers
multicast show multicast group membership information
mysql show mysql config and replication status
ntp show ntp server list and history
php show a php information
service show service status, mode and versions
session show who is logged on
system show the system general informations
uptime show how long the system has been running