We provide Command Line Interface (CLI), the name is LYSH, that is used for configuring, monitoring, and maintaining the imRAD devices.
The CLI allows you to directly execute commands, whether using a console or using remote access methods such as Secure Shell (SSH, port 22).
We do not provide the telnet to access the imRAD devices.
You can also access the imRAD devices via a console port that is located in front of the device. The baud rate(speed) is 115,200 and the serial port type is an RJ-45 connector.
The default or initial Username and Password is each ladmin and 1111.
If you log in with the default, you must change the default password. If not, you can't access the CLI before changing the password.